User Manual Q&AAnswer
Jan 01, 2025 - 02:24 AM
Sure! Here's a step-by-step guide to setting up the TP-Link RE315 Wi-Fi extender:
1. Power on the extender by plugging it into a power outlet near your router. Wait for the Power LED to turn solid on.
2. Download the Tether app from the Apple App Store or Google Play, or scan the QR code provided in the manual.
3. Launch the Tether app and log in with your TP-Link ID. If you don't have an account, create one first.
4. Tap the "+" button in the app and select "Range Extender". If you can't find your device, refer to the FAQ section in the manual.
5. Follow the app instructions to complete the setup. The LED on the extender should turn solid on, indicating a successful connection to your router. If the LED doesn't turn solid on, refer to the FAQ section in the manual.
Alternatively, you can set up the extender using a web browser or the WPS button on your router. Here are the steps for each method:
Via a Web Browser:
1. Connect your computer or smartphone to the extender's network named "TP-Link_Extender".
2. Open a web browser and enter "http://tplinkrepeater.net" or "http://192.168.0.254" in the address bar.
3. Create a password to log in and follow the web instructions to complete the setup.
Via the WPS Button:
1. Press the WPS button on your router.
2. Within 2 minutes, press the WPS button on the extender for 1 second. The LED should change from blinking to solid on, indicating a successful connection.
3. If your router is dual-band, repeat steps 1 and 2 to connect to the other band.
After setting up the extender, you can relocate it to a spot halfway between your router and the Wi-Fi dead zone. Wait for about 2 minutes until the LED turns solid white. If it doesn't, try relocating the extender closer to the router for better signal quality.
Once the extender is set up and in the desired location, you can connect your devices wirelessly or via an Ethernet cable to enjoy the extended Wi-Fi coverage. The password for the extended network is the same as your host router.
You can access the extender settings using the Tether app or a web browser. Refer to the manual for more information on accessing and managing the extender settings.
I hope this helps! If you have any further questions, feel free to ask.
Add New Comment