User Manual Q&AAnswer
Jan 01, 2025 - 02:12 AM
To pair the Cleer Enduro 100 headphones with your device, please follow these steps:
1. Turn off any other Bluetooth devices that are currently connected to your device.
2. Press and hold the power button on the Enduro 100 headphones for 2 seconds to turn them on.
3. The headphones will go into pairing mode automatically when powered on for the first time. If you need to manually enter pairing mode, press and hold the power button until the LED blinks white and red.
4. On your device, go to the Bluetooth settings and search for available devices.
5. Find "Cleer ENDURO 100" on the Bluetooth device list and select it to connect.
6. Once connected, you can start enjoying your music or other audio content through the Enduro 100 headphones.
Please note that if the headphones have been previously paired with a device, they will automatically connect to that device if it is in range and available for pairing. If you want to pair the headphones with a different device, make sure to disconnect them from the previously paired device before attempting to pair with the new device.
For more detailed instructions and information, you can refer to the user manual provided with the headphones.
Add New Comment