User Manual Q&AAnswer
Jan 01, 2025 - 02:14 AM
To connect your Epson POWERLITE X17 LCD Projector to your computer, follow these steps:
1. Ensure that your computer and projector are turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the VGA or HDMI port on your computer.
4. Connect the other end of the cable to the VGA or HDMI port on the projector.
5. Turn on your computer and projector.
6. On your computer, go to the display settings. This can usually be accessed by right-clicking on the desktop and selecting "Display settings" or "Screen resolution."
7. In the display settings, select the appropriate display mode for the projector. This may be labeled as "Duplicate," "Extend," or "Projector only."
8. Adjust the projector settings if necessary. You can use the projector's remote control or the control panel buttons to navigate the menu and make adjustments.
9. Once the connection is established, your computer screen should be projected onto the projector.
For more detailed instructions and troubleshooting tips, refer to the Epson POWERLITE X17 LCD Projector User's Guide provided in the link you provided.
Add New Comment