User Manual Q&AAnswer
Jan 01, 2025 - 01:55 AM
To connect the LED lights on the DS18 Hydro NXL-8M coaxial speakers, you have two options.
Option 1: If you have an LED Control Module (LED-STC), you can connect as shown in the diagram provided in the manual. The black wire (BK) should be connected to the battery positive (+) 12V. Then, depending on the desired color, you can connect the corresponding wire to the battery negative (-). For example, for green color light, connect the wire labeled "G" to the battery negative (-).
Option 2: If you don't have an LED Control Module (LED-BTC), you can connect the LED lights directly to the battery. Again, refer to the diagram in the manual for the specific wire connections based on the desired color.
Please note that the LED Control Module (LED-STC) is sold separately and is not included with the speakers. Make sure to follow the instructions and diagrams provided in the manual for proper LED light connections.
Add New Comment