User Manual Q&AAnswer
Jan 01, 2025 - 01:19 AM
To connect your laptop to the ViewSonic PLED-W800 WXGA HDMI LED Projector, follow these steps:
1. Make sure your laptop and the projector are both powered off.
2. Locate the HDMI input port on the projector. It is labeled "HDMI" and is usually located on the back or side panel.
3. Connect one end of the HDMI cable to the HDMI output port on your laptop.
4. Connect the other end of the HDMI cable to the HDMI input port on the projector.
5. Power on your laptop and the projector.
6. Use the projector's remote control or the control buttons on the projector to select the HDMI input source.
7. Your laptop's screen should now be displayed on the projector.
Please note that some laptops may require you to press a specific key combination (e.g., Fn + F4) to enable the external display output. Refer to your laptop's user manual for instructions on how to do this.
For more detailed instructions and troubleshooting tips, please refer to the user guide provided with the ViewSonic PLED-W800 WXGA HDMI LED Projector.
Add New Comment