User Manual Q&AAnswer
Jan 01, 2025 - 01:07 AM
To connect your Epson W17 WXGA 3 LCD Projector to your computer, follow these steps:
1. Ensure that your computer and projector are both turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the computer's port and the other end to the projector's port.
4. Turn on your computer and wait for it to fully boot up.
5. Turn on the projector by pressing the power button.
6. Use the projector's remote control to select the correct input source. Press the "Source Search" button until the desired input source (VGA or HDMI) is displayed.
7. Adjust the projector's focus and zoom if necessary.
8. On your computer, go to the display settings and select the appropriate resolution for the projector. Refer to your computer's user manual for instructions on how to do this.
9. Your computer's screen should now be projected onto the projector. If not, try pressing the "Auto" button on the projector's remote control to automatically adjust the image.
For more detailed instructions and troubleshooting tips, please refer to the Epson W17 WXGA 3 LCD Projector User Guide.
Add New Comment