User Manual Q&AAnswer
Jan 01, 2025 - 12:38 AM
To connect the Bose Wave Multi-CD Changer to your Wave music system, follow these steps:
1. Before starting the setup procedure, disconnect the AC power cord on your Wave music system and set it aside.
2. Plug the Bose link cable from the changer into the Bose link connector on your Wave music system.
3. Plug the changer power cord into the AC power input connector on the back of the Wave music system.
4. Plug the Wave music system AC power cord into the AC power input connector on the back of the changer.
5. Plug the other end of the AC power cord into an AC (mains) wall outlet.
6. After applying power, "PLEASE WAIT" will appear on the display for about 30 seconds while the system prepares itself for operation. Do not insert any discs until this message disappears.
Once you have connected the Multi-CD Changer to your Wave music system, you can start using it to play CDs. Refer to the owner's manual for instructions on loading and unloading discs, selecting play modes, and controlling the system using the remote control.
For more detailed information and illustrations, please refer to the owner's manual provided with your Bose Wave Multi-CD Changer.
Add New Comment