User Manual Q&AAnswer
Jan 01, 2025 - 12:30 AM
To connect the Sony SSCS8 2-Way 3-Driver Center Channel Speaker to your amplifier, follow these steps:
1. Make sure the power to all components, including the subwoofer, is turned off before starting the hook-up process.
2. Using speaker cords (not supplied), connect the speakers to the speaker output terminals of your amplifier. Make sure to match the plus (+) and minus (–) terminals on the speakers to the corresponding plus (+) and minus (–) terminals on the amplifier.
3. Tighten the speaker terminals by turning them in the direction of the arrows in illustration A-1 of the user guide.
4. Ensure that all connections are firm and secure. Loose connections may cause noise or a short-circuit.
5. For more specific instructions on speaker connection for your amplifier, refer to the operating instructions supplied with your amplifier.
Note: The black striped wires are minus (–) in polarity and should be connected to the minus (–) speaker terminals.
By following these steps, you should be able to successfully connect the Sony SSCS8 2-Way 3-Driver Center Channel Speaker to your amplifier. If you have any further questions or issues, please consult the user guide or contact your nearest Sony dealer for assistance.
Add New Comment