User Manual Q&AAnswer
Jan 01, 2025 - 12:29 AM
To pair your 3D RF glasses with the NEC AD025-RF-X1 Xpand 3D-RF Transmitter, please follow these steps:
1. Make sure the emitter is connected to the TV or projector and that the TV or projector is in 3D mode. You can check if the emitter is connected by ensuring that the LED Red light indicator (in the shape of an X) on the emitter is on.
2. Turn on your 3D RF glasses and put them on.
3. Refer to your glasses' manual for specific instructions on how to pair them with a new emitter, TV, or projector. The pairing process may vary depending on the brand and model of your glasses.
4. If the glasses still do not work after pairing, try unplugging the emitter from the TV or projector for a couple of seconds and then plug it back in. Make sure it is securely connected to the corresponding VESA stereo connector.
If you encounter any further issues, please refer to the user guide provided with the NEC AD025-RF-X1 Xpand 3D-RF Transmitter for additional troubleshooting steps or contact the technical support provided by XPAND Consumer products.
Add New Comment