User Manual Q&AAnswer
Dec 31, 2024 - 11:31 PM
Sure! Here are the step-by-step instructions on how to set up the Technics Turntable:
1. Before setting up, put on the stylus guard to protect the stylus tip, return the tone arm to the arm rest, and fix it with the arm clamp.
2. Remove the magnet cover from the turntable. There is a magnet and its cover on the backside of the turntable. Remove the magnet cover before fitting it to the main unit.
3. Fit the turntable mat on the turntable.
4. Fit the headshell with the cartridge into the tone arm. Keep the headshell horizontal and tighten the locking nut.
5. Attach the balance weight to the rear of the tonearm. The inside of the balance weight is greased.
6. Connect the AC mains lead to the power outlet. Ensure that the power supply voltage corresponds to the voltage printed on the unit.
7. Connect the PHONO cable and PHONO earth lead to the PHONO input terminals of your amplifier or component system. Make sure to tighten the PHONO earth terminal using a Phillips head screwdriver.
8. Turn on the unit using the standby/on switch (OFF/ON).
9. Adjust the height of the unit to make it horizontal by raising or lowering the insulators.
10. Fit the dust cover by inserting it into the dust cover fitting parts on the player.
11. Your Technics Turntable is now set up and ready to use!
Please refer to the manual for more detailed instructions and illustrations.
Add New Comment