User Manual Q&AAnswer
Dec 31, 2024 - 11:28 PM
To pair and connect the Cambridge Soundworks OontZ Angle Solo Bluetooth Portable Speaker with your device, follow these steps:
1. Turn on your OontZ Angle Solo by pressing and holding down the Power Button for 2 seconds. The Blue Light will turn on.
2. Make sure Bluetooth is enabled on your device. Go to the Bluetooth settings on your device and turn it on.
3. On your device, search for available Bluetooth devices. The OontZ Angle Solo will appear as "OontZ Angle Solo xxx" (xxx represents 3 unique characters for your speaker).
4. Select the OontZ Angle Solo from the list of available devices on your device's Bluetooth settings.
5. Once connected, the Blue Light on the OontZ Angle Solo will turn solid blue, indicating that your device is successfully paired and connected with the speaker.
Note: The OontZ Angle Solo can only be connected to one device at a time. If you want to pair and connect a different device, you need to first disconnect the currently paired device by pressing and holding down the Bluetooth button for 5 seconds. The Blue Light will start flashing, indicating that the speaker is ready for the next device to pair and connect.
It's important to note that the volume control on your device and the speaker work independently of each other. To play the speaker at the loudest volume, set the volume on your device to maximum and raise the volume on the speaker to maximum.
For more detailed instructions and troubleshooting tips, you can refer to the Cambridge Soundworks OontZ Angle Solo Bluetooth Portable Speaker user manual.
Add New Comment