User Manual Q&AAnswer
Dec 31, 2024 - 11:27 PM
To connect the BOSS MR4.3B marine speakers to your receiver, follow these steps:
1. Strip back approximately 3/8" of insulation from the positive and negative speaker wires coming from your receiver.
2. Make sure the wire insulation is stripped back far enough so that the bare speaker wire will make a proper connection to the metal clip inside the terminal.
3. Gently depress the colored lever on the speaker's push-pin terminal and insert the striped end of the wire directly into the opening located in the center of the input housing.
4. Make sure to connect the positive (+) terminal on the receiver to the positive (+) terminal on the speaker, and the negative (-) terminal on the receiver to the negative (-) terminal on the speaker.
5. Repeat the above steps for each speaker in your system, ensuring that all speakers are connected with the same respective polarity.
Please refer to the "Connecting Speakers" section in the BOSS MR4.3B 3 Way Weatherproof Marine Speakers User Manual for visual illustrations and additional information on connecting the speakers.
Add New Comment