User Manual Q&AAnswer
Dec 31, 2024 - 10:55 PM
To pair the EDIFIER TWS200 Plus earphones with your device, follow these steps:
1. Place the earbuds in the charging case.
2. Double-click the pairing button on the case to enter Bluetooth pairing mode.
3. The red and white lights on the earbuds will flash rapidly, indicating they are in pairing mode.
4. On your device, go to the Bluetooth settings and search for "EDIFIER TWS200 Plus".
5. Select the earphones from the list of available devices to initiate the pairing process.
6. Once the pairing is successful, the white light on the charging case will flash twice every 5 seconds.
Note: If you are not connected to any Bluetooth device, you can also enter TWS pairing mode by placing the earbuds in the case, pressing and holding the pairing button for around 10 seconds until the white light flashes rapidly. This will clear any previous pairing records and allow you to pair with a new device.
For more detailed instructions and illustrations, please refer to the user guide provided in the manual.
Add New Comment