User Manual Q&AAnswer
Dec 31, 2024 - 04:25 AM
To connect the VocoPro Wireless Microphone System to a mixer, you have two options: unbalanced 1/4" connection or balanced XLR connection.
1. Unbalanced 1/4" Connection:
- Connect the included unbalanced 1/4" cable to the unbalanced output from the Digital-Quad receiver.
- Connect the other end of the 1/4" cable to a microphone input channel on your mixer/amplifier.
2. Balanced XLR Connection (optional):
- Obtain 4 balanced XLR cables (not included).
- Connect each end of the XLR cables to the balanced outputs of the Digital-Quad receiver.
- Connect the other ends of the XLR cables into individual microphone input jacks on your mixer/amplifier (e.g., Mic 1, Mic 2, Mic 3, Mic 4).
Note: For ease of operation, it is recommended to attach the channel 1 output to the channel 1 input, the channel 2 output to the channel 2 input, and so on.
Please refer to the "Getting Connected" section in the user guide for visual illustrations of the connections.
Remember to adjust the microphone volume on your mixer/amplifier to achieve the desired sound level.
Add New Comment