User Manual Q&AAnswer
Dec 31, 2024 - 03:51 AM
To connect the Klipsch RP-140SA Dolby Atmos Speaker to your amplifier, follow these steps:
1. Use 16-12 gauge speaker wire to make the connections.
2. Connect the RED "positive" (+) terminal of the LEFT speaker to the RED "positive" (+) terminal of your amplifier's LEFT channel.
3. Connect the BLACK "negative" (-) terminal of the LEFT speaker to the BLACK "negative" (-) terminal of your amplifier's LEFT channel.
4. Repeat the above steps for connecting all the remaining speakers to the appropriate amplifier channels.
5. Make sure that no bare wires from any of the connections touch any other terminals to avoid causing a short and damaging your equipment.
Note: If you are using Reference Premiere models RP-280F, RP-260F, RP-250F, or RP-160M, which are equipped with dual binding posts, you may need to remove the terminal connecting bar if you are using a bi-wire or bi-amp connection. Please refer to your receiver's manual for further instructions.
For visual reference and additional information, please consult the "CONNECTIONS" section in the Klipsch RP-140SA Dolby Atmos Speaker user manual provided above.
Add New Comment