User Manual Q&AAnswer
Dec 31, 2024 - 03:31 AM
Yes, you can paint the Definitive Technology AW 5500 All Weather Speaker to match your color scheme or blend in with its surroundings. The user manual provides detailed instructions on how to paint the speakers properly. Here are the recommended steps:
1. Gather the necessary materials: a spray can of primer paint (such as Krylon Spray Primer #1318 or equivalent), a spray can of the paint of your choice (choose exterior grade paint if using the speakers outdoors), a paperclip, awl, or corkscrew (for removing the grille), masking tape, and a paint mask (not included).
2. Prepare the speaker for painting: Separate the parts of the speaker, including removing the bracket knobs and brackets, and carefully remove the grilles by hooking them with an awl or bent paper clip.
3. Masking: Mask the binding posts on the back of the speaker, the metal threaded xxxx inserts on the end panels, and the metal screws on the bracket knobs. Also, mask the baffles to protect the drivers, tweeters, low-bass radiators, and baffles. Ensure the tape forms a tight seal around the edges to prevent paint from getting on the speaker parts.
4. Painting the cabinet, bracket knobs, and bracket: Apply two thin coats of primer to the cabinets and locking knobs. The brackets do not require primer. Once the primer is completely dry, apply the finish color. When the paint is completely dry, remove the masking materials.
5. Painting the grille: The grille features an even, protective powder coating that can be painted over. Rotate the logo badge to its desired orientation prior to painting the grille. Use spray paint to apply two thin coats of finish color directly to the grille. Be careful not to fill the holes in the grille with paint.
6. Reassembling: Once the paint is completely dry, carefully fit the grille back into its recess, ensuring it is just resting on the cabinet. Gently push the grille into the grille notch a little bit at a time, starting from one corner and going around the speaker.
Remember to use a paint that is fixed in plastic and metal, and ensure the layer of paint is very thin to avoid closing the micro holes of the speaker's cover. Following these steps will allow you to customize the appearance of your Definitive Technology AW 5500 All Weather Speaker.
Add New Comment