User Manual Q&AAnswer
Dec 31, 2024 - 02:54 AM
To pair the SENSEMILD Retro Bluetooth Speaker with your device, please follow these steps:
1. Ensure that your phone or Bluetooth device is switched on.
2. If the speaker has not been previously paired with a device, switch on the speaker. The blue and red indicator lights will start flashing alternately quickly, indicating that the speaker is in pairing mode.
3. If the speaker has been previously paired with another device, make sure that the device is switched off.
4. Activate the Bluetooth on your phone or Bluetooth device and set it to search for Bluetooth devices.
5. Select "Sensemild S330" from the list of found devices on your phone or Bluetooth device.
6. Once the Bluetooth is paired successfully, there will be a prompt tone, and the blue light on the speaker will turn on continuously.
Note: If the speaker has been previously paired with another device, it will automatically connect with the device if it is powered on and within the connecting range. If not, the speaker will enter standby mode, and the blue light will remain on. The speaker will automatically switch off the Bluetooth after 5 minutes in searching or re-connecting mode.
For more detailed instructions and troubleshooting, please refer to the manual provided with the speaker.
Add New Comment