How do I install the Architech Pro Series Ap-602 6.5-Inch 2-Way Rectangular In-Wall Loudspeakers? (ARCHITECH Ap-602 2-Way Loudspeakers Instructions Manual)

Answer

manuals.plus

Dec 31, 2024 - 01:22 AM


To install the Architech Pro Series Ap-602 in-wall loudspeakers, follow these steps:

1. Choose the desired location for the speakers on the wall. Ensure that there are no obstructions behind the wall that may interfere with the installation.

2. Use a stud finder to locate the studs in the wall. It is recommended to mount the speakers on the studs for secure installation.

3. Mark the desired speaker cutout dimensions on the wall using the provided template. Use a utility knife or a drywall saw to carefully cut out the marked area.

4. Connect the speaker wires to the terminals on the back of the speakers. Ensure that the positive (+) and negative (-) terminals are correctly matched with the corresponding wires.

5. Insert the speakers into the cutout holes in the wall. Use screws or clamps (not included) to secure the speakers to the wall.

6. Connect the other end of the speaker wires to your audio system or amplifier. Follow the instructions provided with your audio system for proper connection.

7. Once the speakers are securely installed and the wiring is connected, test the speakers by playing audio through them. Adjust the volume and settings on your audio system as needed.

Please refer to the Architech Pro Series Ap-602 6.5-Inch 2-Way Rectangular In-Wall Loudspeakers Instructions Manual for detailed installation instructions and any additional information specific to your model.