User Manual Q&AAnswer
Dec 31, 2024 - 12:49 AM
To connect the RA170 power amplifier to your speakers, follow these steps:
1. Locate the 70V OUTPUT terminals on the rear panel of the amplifier. These terminals are spring-loaded and do not require special transformers for speaker connection.
2. Identify the 70-volt speakers you will be using. Make sure they are compatible with the RA170 amplifier.
3. Strip the insulation from the speaker wires that will be connected to the amplifier. Ensure that the exposed wire ends are clean and free from any frayed strands.
4. Press the spring-loaded terminals on the 70V OUTPUT and insert the stripped ends of the speaker wires into the corresponding terminals. Release the terminals to secure the connection.
5. Repeat the process for each speaker you wish to connect to the amplifier.
Note: It is important to observe proper polarity when connecting the speakers. Ensure that the positive (+) terminal of the speaker is connected to the positive terminal of the amplifier, and the negative (-) terminal of the speaker is connected to the negative terminal of the amplifier.
For additional information and visual references, please refer to the user guide provided with the RA170 power amplifier.
Add New Comment