User Manual Q&AAnswer
Dec 31, 2024 - 12:48 AM
To pair the Master & Dynamic MW65 headphones with your device, follow these steps:
1. Slide the power switch on the headphones to the ON position. The battery status will be displayed (LOW/MED/HIGH) at startup.
2. Connect the USB-C connector of the included cable to the headphones and plug the other end into a USB-C port on your device (or use the included adapter to connect to a USB-A port).
3. A solid orange light will indicate that the headphones are charging. Once fully charged, a solid green light will appear.
4. To enter pairing mode, hold the power switch in the pairing position for 2 or more seconds. The white light on the headphones will pulse when in pairing mode. Release the switch.
5. Access the Bluetooth settings on your source device and locate "M&D MW65" in the list of available devices. Select it to connect.
6. A solid light on the headphones indicates that they are successfully connected to your device.
Note: If you want to pair the headphones with multiple devices, enter pairing mode and connect to the first device. Then, enter pairing mode again to disconnect from the first device. Connect to the second device and turn off the headphones. When you turn them on again, they will automatically connect to both devices simultaneously. You can pause one device and play from the other to switch headphone connections.
For more detailed instructions and troubleshooting tips, refer to the complete Master & Dynamic MW65 instruction guide provided above.
Add New Comment