User Manual Q&AAnswer
Dec 31, 2024 - 12:47 AM
To connect the LG SPQ8-S wireless rear speaker kit to your sound bar, follow these steps:
1. Connect the rear speakers to the wireless receiver using the provided speaker cables. Connect the black striped cable to the negative terminal of each speaker and the remaining cable to the positive terminal of each speaker.
2. Connect the wireless receiver to power in the following order: wireless receiver first, then the sound bar. Turn on the sound bar. When the connection is automatically established, the LEDs on the wireless receiver will light up in green.
3. If you see a red LED on the front of the wireless receiver, it means that the sound bar is not connected to the speakers. In this case, follow these steps:
a. Press the Power button on the sound bar to turn it off.
b. Press the PAIRING button on the back of the disconnected wireless receiver. Check if each LED blinks green.
c. Press the Power button on the sound bar to turn it on.
d. When the connection is established, you will see a green LED light on the front of the wireless receiver.
Note: It is important to connect the speaker cables to the corresponding terminals correctly. Connect the positive cable to the positive terminal and the negative cable to the negative terminal. Using other speakers may cause malfunction.
For more detailed instructions and safety precautions, please refer to the complete instruction guide provided with the product.
Add New Comment