User Manual Q&AAnswer
Dec 31, 2024 - 12:45 AM
To connect the Polk Monitor XT30 Compact Center Channel Speaker to your surround sound system, follow these steps:
1. Make sure you have the necessary speaker wire. The speaker wire should have bare ends for connection to the binding posts on the speaker and your amplifier or receiver.
2. Loosen the hex nut on the binding post connector of the speaker.
3. Insert the bare speaker wire through the hole in the binding post connector.
4. Tighten the hex nut down to secure the connection.
5. Repeat the above steps for the other speaker wire.
6. Make sure that the red (+) and black (-) connectors on your amplifier or receiver connect to the corresponding red (+) and black (-) connectors on the Polk Monitor XT30 speaker.
7. Double-check all connections to ensure they are secure.
By following these steps, you should be able to properly connect the Polk Monitor XT30 Compact Center Channel Speaker to your surround sound system for optimal sound quality. For more detailed instructions, please refer to the instruction manual provided with the speaker.
Add New Comment