User Manual Q&AAnswer
Dec 31, 2024 - 12:12 AM
To connect the Smarthome SELECT 5.0-Channel Speaker Kit-Rimless In-Ceiling Speakers to your TV, you will need to follow these steps:
1. Disconnect all devices and cables.
2. Obtain the necessary cables for connection.
3. Cut the ends of the wires to prepare them for connection.
4. Refer to the recommended wiring diagram for the speakers to ensure proper connection.
5. Attach the cables to the appropriate sockets on the speakers.
6. Secure the cables with locks on the sockets.
7. Drill a hole for the wires to pass through.
8. Ensure that the amplifier is unplugged and the breaker is turned off.
9. Insert the wires into the hole and attach them to the terminals on the ceiling speakers.
10. Take the opposite end of the wires and connect them to the terminals on the amplifier.
11. Test the connection by turning on the breaker.
Please refer to the Smarthome SELECT 5.0-Channel Speaker Kit-Rimless In-Ceiling Speakers User Guide for more detailed instructions and illustrations on the connection process.
Add New Comment