User Manual Q&AAnswer
Dec 30, 2024 - 10:56 PM
To connect the On-Q Legrand Outdoor Speakers to your TV, you will need to follow these steps:
1. Locate the audio output on your TV. This is typically labeled as "Audio Out" or "Line Out" and may be in the form of RCA or 3.5mm headphone jack.
2. Connect one end of an RCA cable or a 3.5mm audio cable to the audio output on your TV.
3. Connect the other end of the cable to the audio input on the outdoor speaker receiver. The audio input on the receiver is usually labeled as "Audio In" or "Line In" and may also be in the form of RCA or 3.5mm jack.
4. Make sure the colors on the RCA cable match the colors on the ports. For example, connect the red RCA cable to the red port and the white or black RCA cable to the white or black port.
5. Once the cables are connected, turn on your TV and select a program to watch.
Note: If the TV and outdoor speaker receiver are located far apart, you may need a longer RCA cable to connect them.
Please refer to the On-Q Legrand, Home Office & Theater, Outdoor Speakers Instructions Manual for more detailed information and troubleshooting tips.
Add New Comment