User Manual Q&AAnswer
Dec 30, 2024 - 10:54 PM
To charge the Pyle Portable Waterproof Floating Pool Speaker, follow these steps:
1. Unscrew the bottom cap of the speaker in a counter-clockwise direction and open it.
2. Connect the micro USB plug of the USB cable to the micro USB connector of the speaker.
3. Plug the other end of the USB cable into a standard DC 5V 1000mA adapter or connect it to a computer.
4. The LED indicator on the speaker will light up in red, indicating that it is charging.
5. Once the speaker is fully charged, the LED indicator will turn off.
Note: The charging time for the speaker is approximately 8 hours, and the battery life is approximately 4 hours. It is recommended to use a compatible power adapter and the supplied USB cable for charging. Make sure not to expose the battery to excessive heat or dispose of it improperly.
Add New Comment