User Manual Q&AAnswer
Dec 30, 2024 - 10:40 PM
To connect your Pyle Vintage Record Player to Bluetooth speakers, please follow these steps:
1. Make sure your turntable has a built-in preamp. If it does, proceed to the next step. If not, you will need to connect an external preamp between the turntable and the Bluetooth speakers.
2. Plug one end of an RCA cable into the RCA output jacks on the back of the turntable.
3. Plug the other end of the RCA cable into a 3.5mm Bluetooth transmitter. This transmitter will convert the analog signal from the turntable into a Bluetooth signal.
4. Turn on your Bluetooth speakers and put them into pairing mode. Refer to the user manual of your Bluetooth speakers for instructions on how to do this.
5. Once your Bluetooth speakers are in pairing mode, turn on the Pyle Vintage Record Player and navigate to the Bluetooth settings on the turntable.
6. Select your Bluetooth speakers from the list of available devices. The turntable will establish a connection with the speakers.
7. Once the connection is established, you should be able to play your vinyl records wirelessly through your Bluetooth speakers.
Please note that the specific steps may vary depending on the model of your Bluetooth speakers and the turntable. Refer to the user manuals of both devices for more detailed instructions.
Add New Comment