User Manual Q&AAnswer
Dec 30, 2024 - 10:29 PM
To pair your JVC True Wireless Earbuds with your Bluetooth device, please follow these steps:
1. Make sure the Bluetooth device is within one meter of the earbuds when pairing.
2. On your Bluetooth device, turn on the pairing mode.
3. If you have previously paired the earbuds with another device, reset the pairing by erasing the pairing data from the Bluetooth device list.
4. Turn off and then back on the Bluetooth feature on your connected device.
5. Place the earbuds in the charging case and make sure they are fully charged.
6. Take the earbuds out of the charging case.
7. The earbuds should automatically turn on and enter pairing mode. If they don't, press and hold the power button on both earbuds for a few seconds until the LED lights flash red and blue alternately.
8. On your Bluetooth device, search for available devices and select "JVC HA-A17T" from the list.
9. Once connected, the earbuds will emit a voice prompt or a tone to indicate successful pairing.
If you are still experiencing difficulties with pairing, please refer to the troubleshooting section in the operation manual or contact JVC customer support for further assistance.
Add New Comment