User Manual Q&AAnswer
Dec 30, 2024 - 09:38 PM
To pair your JVC AE wireless earbuds with your device, please follow these steps:
1. Make sure the earbuds are turned off. The indicator light should be turned off.
2. Press and hold the button on the earbuds (Maru button) until the indicator light starts flashing red and blue quickly and alternately.
3. Release your finger once you see the indicator light flashing red and blue quickly and alternately.
4. Turn on the Bluetooth function on your device (e.g., smartphone).
5. In the Bluetooth settings of your device, search for available devices.
6. Look for "JVC HA-ET65BV" in the list of available devices and select it.
7. Once the connection is established, the indicator light on the earbuds will flash slowly in blue.
Note: During the pairing process, your device may require you to enter a PIN code. If prompted, enter "0000" as the PIN code for the earbuds.
If the connection (pairing) is not completed within 5 minutes after the indicator starts flashing, the earbuds will automatically turn off. In that case, repeat the pairing process from step 1.
For more detailed instructions and troubleshooting, please refer to the instruction manual provided with your JVC AE wireless earbuds.
Add New Comment