User Manual Q&AAnswer
Dec 30, 2024 - 05:47 AM
To connect the Micca ON3 speakers to your computer, follow these steps:
1. Place the Micca ON3 speakers on either side of your computer monitor.
2. Use the provided 3.5mm to RCA cable to connect the computer's 3.5mm audio output to the RCA input on the back of the Micca ON3. For desktop computers, the main stereo audio output jack is typically located on the back and is green colored. For laptops, use the headphone output jack.
3. Set the computer's volume output to maximum and use the Micca ON3's volume control to adjust the playback volume.
4. If you prefer to use the computer's volume control, you can press the "75%" button on the ON3's remote control to set its volume. Note that higher volume settings beyond 75% may have more audible background noise.
5. If you want to play music from a temporary source such as a smartphone, you can connect it to the AUX jack on the front of the Micca ON3 using the included 3.5mm AUX audio cable. The AUX input has priority over the rear RCA input. To resume playing music from the RCA input, disconnect the AUX input from the Micca ON3.
Please refer to the user manual for additional information and troubleshooting tips.
Add New Comment