User Manual Q&AAnswer
Dec 30, 2024 - 05:29 AM
To connect the Inland 87015 headset to your PC, follow these steps:
1. If your PC has a USB port, simply plug the USB connector of the headset into an available USB port on your computer. The computer will automatically recognize the headset and install any necessary drivers.
2. If your PC does not have a USB port, but has a 3.5mm headphone jack, you can connect the headset using a 3.5mm audio cable. Plug one end of the audio cable into the headphone jack on your PC and the other end into the corresponding audio jack on the headset.
3. If your PC has separate audio and microphone jacks, you may need to use a splitter cable. Connect the headphone plug of the splitter cable to the headphone jack on your PC, and then connect the headphone and microphone plugs of the headset to the corresponding jacks on the splitter cable.
Once the headset is connected, you may need to adjust the audio settings on your PC to ensure that the sound is coming out of the headset. Refer to the manual or the "How to make sound come out of headset" section above for instructions on adjusting the audio settings.
Please note that the specific steps may vary depending on your PC's configuration.
Add New Comment