User Manual Q&AAnswer
Dec 30, 2024 - 04:52 AM
Wiring the is a straightforward process. Here are the steps to wire them correctly:
1. Determine the wiring option you want to use. The manual mentions two options: using the included spade connectors or utilizing the DEUTSCH™/Amphenol connector (not included) input next to the COLOR OPTIX™ connector.
2. If using the spade connectors, connect the speaker wires to the speaker terminals. The positive speaker input is indicated by the red wire, and the negative speaker input is indicated by the black wire.
3. If using the DEUTSCH™/Amphenol connector, refer to the manual for the pin-out diagram to correctly connect the wires. The positive speaker input is indicated by the red wire, and the negative speaker input is indicated by the black wire.
4. Ensure proper polarity when connecting the wires. The positive terminal of the speaker should be connected to the positive wire, and the negative terminal should be connected to the negative wire.
5. Once the wires are connected, secure the speaker in place using the provided screws. Tighten the screws until the speaker is snug but avoid over-tightening.
By following these steps, you should be able to correctly wire the Rockford Fosgate M2-8H marine speakers to your audio system. For more detailed instructions and diagrams, refer to the user manual provided.
Add New Comment