User Manual Q&AAnswer
Dec 30, 2024 - 04:49 AM
To install the Monolith THX-LCR THX Ultra Certified 3-Way LCR in-Wall Speaker, follow these steps:
1. Determine the ideal location for the speaker on your wall. Ensure that there is enough space and that it is positioned correctly for optimal sound performance.
2. Use a stud finder to locate the studs in the wall. Mark the positions of the studs where you plan to mount the speaker.
3. Cut a hole in the wall using a drywall saw or a hole saw, following the dimensions specified in the product manual (20.7 x 18.7 x 8.9 inches).
4. Connect the speaker wires from your audio receiver to the speaker terminals on the back of the Monolith THX-LCR speaker. Ensure that the positive and negative terminals are correctly matched.
5. Carefully insert the speaker into the wall opening, ensuring that it is aligned with the studs. Use screws or mounting brackets (if provided) to secure the speaker to the wall.
6. Once the speaker is securely mounted, connect the other end of the speaker wires to the corresponding terminals on your audio receiver.
7. Test the speaker by playing audio through it. Adjust the volume and settings on your audio receiver as needed to achieve the desired sound quality.
Note: It is recommended to consult the product manual for specific installation instructions and any additional considerations for your particular setup.
Add New Comment