User Manual Q&AAnswer
Dec 30, 2024 - 04:33 AM
To connect your Epson EX3212 Portable Projector to your computer, follow these steps:
1. Ensure that both the projector and your computer are turned off.
2. Connect one end of the VGA cable (included with the projector) to the VGA port on the back of the projector.
3. Connect the other end of the VGA cable to the VGA port on your computer.
4. If your computer has an HDMI port, you can also use an HDMI cable (not included) to connect the projector to your computer. Simply connect one end of the HDMI cable to the HDMI port on the back of the projector and the other end to the HDMI port on your computer.
5. Once the cables are connected, turn on the projector and your computer.
6. On your computer, go to the display settings and select the appropriate display mode for the projector. This may vary depending on your operating system, but typically you can access the display settings by right-clicking on the desktop and selecting "Display Settings" or "Screen Resolution."
7. In the display settings, you should see the option to extend or duplicate your desktop onto the projector screen. Choose the desired option.
8. The projector should now display the content from your computer. Adjust the focus and other settings on the projector as needed.
For more detailed instructions and troubleshooting tips, refer to the User's Guide provided with the Epson EX3212 Portable Projector.
Add New Comment