User Manual Q&AAnswer
Dec 30, 2024 - 04:29 AM
To connect your ViewSonic PA502X DLP Projector to your computer, follow these steps:
1. Ensure that both the projector and your computer are powered off.
2. Locate the VGA or HDMI port on your computer. The VGA port is typically blue, while the HDMI port is rectangular and labeled "HDMI."
3. Connect one end of the VGA or HDMI cable to the corresponding port on your computer.
4. Locate the VGA or HDMI input port on the projector. It is usually labeled "VGA IN" or "HDMI IN."
5. Connect the other end of the VGA or HDMI cable to the VGA or HDMI input port on the projector.
6. Power on your computer and the projector.
7. Press the "Source" button on the projector or the remote control to select the input source. Use the arrow keys to navigate and the "OK" button to confirm.
8. Select the appropriate input source (VGA or HDMI) that matches the connection you made in step 5.
9. The projector should now display the content from your computer.
For more detailed instructions and troubleshooting tips, please refer to the ViewSonic PA502X DLP Projector User Guide provided in the link you provided.
Add New Comment