User Manual Q&AAnswer
Dec 30, 2024 - 04:10 AM
To connect the Q Acoustics 3060S Active Subwoofer to your amplifier, follow these steps:
1. Make sure that both the subwoofer and the amplifier are switched off at the mains before making any connections.
2. Locate the terminals on the back of the subwoofer. These terminals are where you will connect the subwoofer to the amplifier.
3. Use a standard RCA cable to connect the subwoofer's input terminal to the subwoofer output terminal on your amplifier. The RCA cable should have a red plug and a white or black plug. The red plug should be connected to the subwoofer's red input terminal, and the white or black plug should be connected to the subwoofer's white or black input terminal.
4. Once the RCA cable is securely connected, switch on the mains power for both the subwoofer and the amplifier.
5. Set the main volume control on your amplifier to a low level before switching on your sound system or changing input sources.
6. Gradually turn up the volume on your amplifier to the desired level.
Note: It is important to read the safety information and warnings provided in the manual before making any connections or adjustments to your sound system.
Add New Comment