User Manual Q&AAnswer
Dec 30, 2024 - 03:53 AM
To connect the Monolith THX Certified Satellite Speakers to your home theater system, follow these steps:
1. Ensure that you have a multichannel receiver or amplifier that can support the speakers.
2. Connect the speaker wires from the receiver or amplifier to the binding posts on the back of each speaker. Make sure to match the positive (+) and negative (-) terminals correctly.
3. If you are using a subwoofer with the speakers, connect the subwoofer output from your receiver or amplifier to the input on the subwoofer.
4. Adjust the crossover settings on your receiver or amplifier to match the frequency response of the speakers (down to 80Hz).
5. Power on your receiver or amplifier and set the volume to your preferred level.
6. Test the speakers by playing audio through them and make any necessary adjustments to the speaker levels using the receiver's setup menu.
For more detailed instructions, please refer to the user manual provided with the Monolith THX Certified Satellite Speakers.
Add New Comment