User Manual Q&AAnswer
Dec 30, 2024 - 03:36 AM
To install the Earthquake Sound K-10 Kompressor Subwoofer in your vehicle, follow these steps:
1. Choose a suitable mounting location in the rear of your vehicle. The subwoofer should be oriented so that the active driver (front of the tube) fires into a corner, about 2 to 4 inches away.
2. Inspect the mounting area to ensure that the mounting screws will not damage any vital components of your vehicle, such as the gas tank, electrical wiring, fuel lines, spare tire, etc.
3. Ensure that the chosen surface is solid enough to withstand the stress of subwoofer mounting.
4. In a hatchback, lay the tube parallel to the rear of the vehicle, firing into the corners.
5. In a sedan, secure the tube against the sides of the trunk, firing toward the rear of the vehicle.
6. In a trunk, mount the tube behind the seat, firing outward.
7. Position the tube so that the active driver is facing a hard reflective surface (3-5 inches away). This will add a 3dB gain to the total system response.
8. Once you have determined the mounting location, mark the correct place on your vehicle to drill the required mounting holes.
9. Mount the tube subwoofer by screwing or bolting it to the vehicle through both holes in each leg. Ensure that the subwoofer is securely fastened to your vehicle.
Please refer to the complete owner's manual for more detailed instructions and illustrations on the installation process.
Add New Comment