User Manual Q&AAnswer
Dec 30, 2024 - 03:35 AM
To program the remote control for the Directed 3100L Avital 1-Way Security System, follow these steps:
1. Open a door to activate the system.
2. Turn the ignition on and then off.
3. Press and release the Valet/Program switch the number of times corresponding to the desired channel (refer to the Features Menu in the manual for channel numbers).
4. Press and hold the Valet/Program switch.
5. The LED will flash to indicate the accessed feature.
6. While holding the Valet/Program switch, press the button on the remote control that you want to assign to that channel.
7. The system will chirp to confirm successful programming.
8. Release the Valet/Program switch.
Note: You can program up to four remote controls to the system. Make sure to follow the specific button assignments for each feature as outlined in the manual.
For more detailed instructions and additional programming options, please refer to the Directed 3100L Avital 1-Way Security System Installation Guide.
Add New Comment