User Manual Q&AAnswer
Dec 30, 2024 - 03:32 AM
To program the remote controls for the VOXX APS25Z Electronics Prestige Car Alarm System, follow these steps:
1. Turn the ignition key to the ON position.
2. Press and release the valet/override button on the antenna three times.
3. The system will beep once, indicating that you have accessed Bank 1 for remote programming.
4. Press the Lock button on each remote control you wish to program. The system will beep once for each remote control added.
5. Turn the ignition key to the OFF position to exit programming mode.
Note: The system can store a maximum of four remote controls. If you program additional remote controls, the oldest programmed remote control will be deleted.
For more detailed instructions and options for programming the remote controls, refer to the "Bank 1: Add/Remove Remote Controls" section in the installation guide.
Please refer to the complete installation guide for further details and specific instructions for your vehicle model.
Add New Comment