User Manual Q&AAnswer
Dec 30, 2024 - 03:19 AM
To connect the subwoofer to your car audio system, you have two options depending on the type of audio output your head unit has:
1. High-Level (Speaker Level) Inputs: If your head unit does not have RCA outputs, you can use the speaker outputs for the audio source. Use the supplied high-level input wire and connect the speaker outputs from the head unit to the high-level input connector of the amplifier. Make sure to observe polarity to avoid audio phase problems.
2. Low-Level (RCA) Inputs: If your head unit or other signal source has RCA outputs, it is recommended to use low-level inputs for the best audio performance. Use a high-quality RCA cable and connect it from the RCA outputs of your head unit to the low-level RCA inputs of the subwoofer.
Please refer to the connection diagram in the manual for a visual representation of the connections.
Note: Do not connect both the high-level and low-level inputs from your receiver to the amplifier at the same time. Choose one method based on the available outputs on your head unit.
For more detailed instructions and illustrations, please refer to the complete features/instruction guide provided in the manual.
Add New Comment