User Manual Q&AAnswer
Dec 30, 2024 - 03:15 AM
To pair the MEE audio Air-Fi Metro2 AF72 with your device, follow these steps:
1. Make sure the headphones are charged. Open the charging port cover on the right earpiece and connect the micro-USB charging cable to the Metro2 and a powered USB port. The red indicator light will stay on while charging and turn off when charging is complete. Charging time is typically 2 hours.
2. Select the proper sized ear tips and install the stabilizer fins. Try all three sizes of ear tips to find the best fit. Install the supplied stabilizer fins and adjust for the best stability. You can also configure the cable clips for a more secure fit if desired.
3. Press and hold the multifunction button on the headphones for 8 seconds until the red and blue indicator lights flash in an alternating manner. This will put the headphones in pairing mode.
4. On your device, go to the Bluetooth menu and select "Air-Fi Metro 2" to initiate the pairing process. If "Air-Fi Metro 2" doesn't appear in the Bluetooth menu, ensure that the red and blue indicator lights on the headphones are flashing alternatively and that Bluetooth is enabled on your device. If prompted for a pin, enter "0000".
5. Once the pairing is successful, the device and headphones will be connected. The blue indicator light on the Metro2 will flash twice every 4 seconds to indicate a successful connection.
Note: The Metro2 can remember up to 8 paired devices. If you want to connect to a previously paired device, simply turn on the headphones and they will automatically connect to the most recently connected device within range.
For more detailed information and troubleshooting, you can refer to the complete user manual provided with the product.
Add New Comment