User Manual Q&AAnswer
Dec 30, 2024 - 03:00 AM
To install the Jensen MS6007WR 6.5-Inch Coaxial Marine Speakers, follow these steps:
1. Determine the mounting location: Choose a suitable location on your boat where you want to install the speakers. Ensure that there is enough space and clearance for the speakers to fit properly.
2. Prepare the mounting hole: Use the provided template to mark the mounting hole on the chosen location. Carefully cut out the hole using a hole saw or a suitable cutting tool.
3. Connect the speaker wires: Strip the insulation from the speaker wires and connect them to the corresponding terminals on the back of the speakers. Ensure proper polarity (positive to positive, negative to negative) to avoid phase cancellation.
4. Mount the speakers: Insert the speakers into the mounting holes and secure them using the provided mounting hardware. Make sure they are firmly attached and aligned properly.
5. Connect the speakers to the audio system: Run the speaker wires from the speakers to the audio system or amplifier. Connect the positive and negative wires to the corresponding terminals on the audio system.
6. Test the speakers: Once the installation is complete, turn on your audio system and test the speakers to ensure they are functioning properly. Adjust the volume and sound settings as desired.
For more detailed instructions and diagrams, please refer to the Jensen MS6007WR 6.5-Inch Coaxial Marine Speakers user manual.
Add New Comment