User Manual Q&AAnswer
Dec 30, 2024 - 02:57 AM
To pair your device with the Pyle PLMRKT9 Bluetooth controller, please follow these steps:
1. Connect the Bluetooth controller box to your device using the provided cables.
2. Press and hold the power button on the Bluetooth controller for three seconds until the power indicator lights up in red.
3. The system will automatically go into pairing mode. The power indicator will turn red for about 7 seconds and then alternate between red and blue (Bluetooth blue, Power red).
4. On your device, make sure that Bluetooth is turned on and search for available devices.
5. Select "PYLE PLMRKT9" from the list of available devices to connect to the Bluetooth controller. If the Bluetooth controller is successfully connected, the light will turn blue and stop flashing.
6. If your device is out of Bluetooth range or the connection is lost, the Bluetooth will be automatically disconnected. It will automatically reconnect when the device is detected within range again. If this doesn't happen, please repeat steps 1 and 2.
Please refer to the owner's manual for more detailed instructions and troubleshooting tips.
Add New Comment