User Manual Q&AAnswer
Dec 30, 2024 - 02:53 AM
To set the alarm on the Naxa Electronics NRC-190 Dual Alarm Clock with Qi Wireless Charging, follow these steps:
1. Make sure the clock is in Clock mode.
2. Press the ALARM/SLEEP button once to select Alarm 1. The hour digit will flash.
3. Use the or buttons to set the desired hour for the alarm.
4. Press the ALARM/SLEEP button again. The minute digit will flash.
5. Use the or buttons to set the desired minute for the alarm.
6. Press the ALARM/SLEEP button again. The Alarm 1 status will appear on the display.
7. Use the or buttons to activate or turn off the alarm, and set the wake-up mode (e.g., radio or beep) as desired.
8. Wait a few seconds for the settings to be saved and the clock to return to displaying the current time.
To set Alarm 2, follow the same steps but press the ALARM/SLEEP button four times to select Alarm 2.
Remember to press the ALARM/SLEEP button to turn off the alarm and reset it for the next day. You can also disable the alarm completely by selecting "OFF" in the Alarm 1 or Alarm 2 status.
For more detailed instructions and information, please refer to the complete instruction guide provided with the product. You can find the guide here: [link to the instruction guide].
Add New Comment