User Manual Q&AAnswer
Dec 30, 2024 - 02:34 AM
To connect your laptop to the ViewSonic PJD5353LS projector using an HDMI cable, please follow these steps:
1. Make sure both the laptop and the projector are turned off.
2. Locate the HDMI input port on the back of the projector. It should be labeled as "HDMI IN."
3. Connect one end of the HDMI cable to the HDMI output port on your laptop.
4. Connect the other end of the HDMI cable to the HDMI input port on the projector.
5. Turn on your laptop and the projector.
6. On your laptop, go to the display settings and select the appropriate display mode for the projector. This may vary depending on your operating system, but it is usually found in the Control Panel or System Preferences.
7. Once the laptop is set to display on the projector, you should see the laptop's screen projected onto the projection surface.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided for the ViewSonic PJD5353LS projector.
Add New Comment