User Manual Q&AAnswer
Dec 30, 2024 - 02:01 AM
To pair your Zero Chill Bluetooth speaker with your device, follow these steps:
1. Turn on your Zero Chill speaker by long-pressing the "play/pause" button for 3 seconds. The speaker will immediately search for a device to pair with.
2. If your device has not been previously paired with the speaker, the LED light on the speaker will switch from blinking blue to blinking red and blue alternately.
3. Enable Bluetooth on your device and go to the Bluetooth menu. Select "Zero Chill" from the list of available devices.
4. Once your device and the Zero Chill speaker are connected, you will hear a tone, and the LED light on the speaker will turn solid blue momentarily and then move to a slow blinking blue.
5. Alternatively, you can also connect your device to the Zero Chill speaker using an aux cord, which is included. When the aux cord is plugged in, the LED light on the speaker will turn solid red.
Note: Once paired, the speaker will remember the device every time it is turned on. To disconnect the speaker from the device, hold down the "X" and "play/pause" buttons at the same time for 2 seconds.
If you are still having trouble pairing your devices, make sure that Bluetooth is enabled on your device and that it is within the speaker's Bluetooth range. You may also try restarting both your device and the speaker and repeating the pairing process.
Add New Comment