User Manual Q&AAnswer
Dec 30, 2024 - 01:31 AM
To connect your EMB ES900BT Bluetooth speaker to a Bluetooth device, please follow these steps:
1. Ensure that your EMB ES900BT speaker is turned on and in pairing mode. You can turn it on by pressing and holding the ON/OFF button for 3 seconds. The speaker should emit a pairing sound or the LED indicator should start flashing.
2. On your Bluetooth device (e.g., smartphone, tablet, computer), go to the Bluetooth settings menu.
3. Enable Bluetooth on your device if it is not already enabled.
4. In the Bluetooth settings menu, search for available devices. Your EMB ES900BT speaker should appear in the list of available devices. It may be listed as "ES900BT" or a similar name.
5. Select the EMB ES900BT speaker from the list of available devices to initiate the pairing process.
6. Once connected, you should hear a confirmation sound or see a notification on your Bluetooth device indicating that it is connected to the EMB ES900BT speaker.
7. You can now play audio from your Bluetooth device, and it will be transmitted wirelessly to the EMB ES900BT speaker.
Note: If prompted, enter a passcode or PIN to complete the pairing process. The default passcode for the EMB ES900BT speaker is often "0000" or "1234," but please refer to the user manual for the correct passcode if needed.
If you encounter any issues during the pairing process, please refer to the user manual for troubleshooting steps or contact EMB customer support for further assistance.
Add New Comment