User Manual Q&AAnswer
Dec 29, 2024 - 11:37 PM
To connect the Zbrqotl Turntable Vintage Record Player with Bluetooth to external speakers, you can follow these steps:
1. Locate the stereo RCA outputs on the record player. These are usually labeled as "R" and "L" for the right and left channels.
2. Get an RCA cable with the appropriate length to connect the record player to your external speakers. Make sure the cable has RCA connectors on both ends.
3. Plug one end of the RCA cable into the stereo RCA outputs on the record player. The red connector should go into the "R" output, and the white or black connector should go into the "L" output.
4. Connect the other end of the RCA cable to the RCA inputs on your external speakers. Again, match the red connector to the right channel input and the white or black connector to the left channel input.
5. Once the connections are made, turn on your external speakers and set the input source to the RCA input where you connected the record player.
6. Start playing a record on the Zbrqotl Turntable Vintage Record Player with Bluetooth, and the sound should now be coming through your external speakers.
Note: If your external speakers do not have RCA inputs, you may need additional adapters or cables to connect the record player to your specific speaker setup. Refer to the user manual of your speakers for more information on the required connections.
Please consult the user manual of the Zbrqotl Turntable Vintage Record Player with Bluetooth for any specific instructions or troubleshooting tips related to connecting external speakers.
Add New Comment