User Manual Q&AAnswer
Dec 29, 2024 - 11:36 PM
To connect your Como Audio Solo wireless speaker to your Wi-Fi network, follow these steps:
1. After turning on the Solo for the first time, the Set Up Wizard will appear on the display. Follow the on-screen instructions for each step.
2. When prompted to connect to your Wi-Fi network, select "Keep network connected" to maintain accurate time, receive software updates, and access Spotify Connect.
3. If your Wi-Fi network requires a password, select "Skip WPS" when prompted. Use the remote control's keypad to enter your Wi-Fi password, then select "OK" to proceed.
4. The Solo will scan for available Wi-Fi networks. Select your network from the list, then enter the password if required.
5. Once connected, the Solo will display a confirmation message. You can now enjoy streaming music and other features that require an internet connection.
Note: If your Wi-Fi network is not shown during the setup process, you can try the following steps:
- Press and hold the Menu xxxx on the Solo.
- Select "System Settings" from the menu.
- Select "Network" and then "Network Wizard" to start the setup process again.
For more detailed information and troubleshooting tips, you can refer to the comprehensive user manual available on the Como Audio website.
Add New Comment