User Manual Q&AAnswer
Dec 29, 2024 - 11:28 PM
To connect a powered subwoofer and four speakers to the Lanzar EV464 Car Power Amplifier, you can use the line out RCA jacks as the feed to the powered subwoofer while still having four speakers working. Here's how you can do it:
1. Connect the RCA outputs of your head unit to the input RCA jacks of the amplifier using high-quality shielded RCA cables.
2. Use the line out RCA jacks on the amplifier as the feed to the powered subwoofer. This will allow you to build a multiple amplifier system without the need for splitter cords.
3. Connect the speakers to the speaker terminals on the amplifier. Make sure to observe the correct polarity (positive and negative connections).
4. Set the crossover mode selector on the amplifier to the desired mode (low pass, high pass, or flat) depending on your speaker configuration and preferences.
5. Adjust the variable low pass filter and variable high pass filter controls to limit the frequencies distributed to the speakers and subwoofer, respectively.
6. Fine-tune the various controls, such as the level controls and bass boost control, to achieve the desired sound output.
Please refer to the Lanzar EV464 Car Power Amplifier's owner's manual for more detailed instructions and diagrams on the installation and configuration of the amplifier.
Add New Comment